The Replacement Crown Gear for Lippert Components RV Slide-Out Mechanism # LC116658 does not come with a set screw.
It is not available as a separate part that I could find but I did manage to find out it is a 3/8" - 16 x 3/8" set screw, which should be available locally at hardware stores. view full answer...
Yes, the mounting hardware is included with the Solera slide topper so you won't need to purchase more hardware for the installation. The 12 foot slide-out awning is the exact part number you mentioned:
- Solera RV Slide-Out Awning - 12'1" Wide - 48" Projection - White # LCV000163298
The Solera # LCV000163298 will slide-outs that measure between 140" and 145" from outside to outside of your slide box, so you'll want to make sure that your has those measurements. view full answer...
When it comes to The Bearing Block for your Schwinntec inverted slide system The Lippert Replacement Standard Bearing Block Kit for RV In-Wall Slide-Out # LC379060.
This system will replace the standard bearing block kit for Lippert In-wall slide-out systems. We do not currently have any other parts that will work for you. view full answer...
The tray is not included with the Rail Kit for Kwikee SuperSlide II, # LC370782. This is a kit that allows for custom fabrication of a tray to meet the needs or wants of an RV owner when a prefabricated slide out tray does match their wants/needs. These rail kits are available in varying lengths from 42" to as long as 90" in length. Please see the helpful link below for length options. view full answer...
There isn't a way to get the Slide topper without the rail, so you would need to get the full kit:
- Solera RV Slide-Out Awning - 13'1" Wide # LCV000168109
This will fit slides that have a flange-to-flange measurement of 152" to 157" wide. I did want to mention, just to cover all the bases, that if you were referring to your trailer coming with the Solera pre-installed brackets, and not the rail, you would still need the full awning kit, but you would also need the Solera Slide Topper... view full answer...
Yes, the MORryde RV Cargo Sliding Tray part # MR38FR comes with the frame rails which get bolted to the floor and the tray slides within. view full answer...
Yes, I was able to confirm that the track or mounting rail that attaches the awning to the side wall of the RV is included with awning # LCV000168105! So you will not have to source a rail. view full answer...
While this isn't a kit that is sold individually, I reached out to MORryde, who was able to tell me the parts breakdown of the mounting hardware for the MORryde Sliding Tray for RV Cargo Compartment - 60" x 20" # MR44FR.
They said the Sliding Trays such as # MR44FR came with the following hardware:
- (12) #12-11 x 2-1/2" Philips pan head sheet metal screws
- (12) #12-11 x 1" Phillips pan head sheet metal screws
- (8) 5/16"-18 x 2-1/2" grade 5 bolts
- (8) 5/16"-18 grade 2 nylon lock... view full answer...
The Furrion Chill Rooftop RV Air Conditioner - 13,500 Btu - White # FR26PR does come with the foam installation gasket you were referring to already attached. If you look at the installation instructions attached you will see on page 11 they point out that lifting versus sliding is required to prevent that gasket from damage and causing leakage. view full answer...
Yes! I am happy to confirm that the MORryde Sliding Tray for RV Cargo Compartment # MR44FR comes with all universal mounting hardware required for installation. I went ahead and attached an image of the part listing from the manual as well as a photo of the hardware provided. view full answer...
The Lippert Solera Slide-Topper Awning # LCV000163289 does not have an anti-billowing device.
My technical contact at Lippert/Solera advised that their awnings have enough spring tension to prevent unintended extension of the awning fabric, even when the RV is driven at highway speeds.
At the time of installation the awning roller should be wound fourteen rotations to put sufficient tension on the springs. This spring tension is what avoids the need for a solution such as an anti-billowing... view full answer...
The Solera 7.5' Slider (Slide-Topper) # LCV000163287 does come with everything needed for installation. No other parts are required. I have included a link to a video covering the features of the Solera slide-out awnings. view full answer...
The tab on a windshiled that allows for attaching a backup mirror - or in this case the replacement mirror monitor - is not included with the Rear View Safety Backup Camera System - Mirror Monitor - License Plate Mounted Camera # RVS-778718N.
That is something that needs to be on your windshield already, and you'd just remove the factory mirror from that tab and slide on the replacement mirror/monitor; you can see an example of this at about the 6:30 marked of the linked video install... view full answer...
The Lippert Venture Actuator Slide-Out Motor, part # LC132682, has everything you see pictured on the product page, including the actuator tube. view full answer...
The Solera Slider Topper awnings like # LCV000168110 come complete with mounting hardware, as well as the awning rail. The hardware hole pattern is universal and will match most competitive brands.
To be sure you are ordering the correct Solera Slider, select the fabric size that extends no less than 2-1/2-inches beyond each side of your slide box width (a total of at least 5-inches longer than the slider box).
This awning unit is made in the USA. view full answer...
Parts like the Replacement 18:1 High Speed Motor Assembly for Lippert Components Venture Actuator and Slide-Out # LC295380 will have a 1 year limited warranty against manufacturing defects. view full answer...
The Solera slide-out awnings such as # LCV000163285 did not used to ship with the necessary awning rail. But I am happy to report that they do now! So you would not have to get one separately. view full answer...
I reached out to my contact at TorkLift International, and the pins you are referring to are 1/4 inch diameter and 2-1/2 inches long for the TorkLift Custom Frame-Mounted Camper Tie-Downs for a Toyota Tacoma. These frame mounts are vehicle specific and any step rails could cause interference. view full answer...